diff --git a/ESPHome/ld2410s-esp32.yaml b/ESPHome/ld2410s-esp32.yaml
new file mode 100644
index 0000000..cca5a27
--- /dev/null
+++ b/ESPHome/ld2410s-esp32.yaml
@@ -0,0 +1,114 @@
+external_components:
+  # LD2410s mmwave sensor
+  - source:
+      type: git
+      url: https://github.com/MrUndead1996/ld2410s-esphome
+      ref: main
+    components: [ ld2410s ]
+
+esphome:
+  name: ld2410s-esp32
+  friendly_name: ld2410s-esp32
+
+esp32:
+  board: esp32-s2-saola-1
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: !secret api_encryption_key
+
+ota:
+  - platform: esphome
+    password: !secret ota_password
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: !secret fallback_ap_ssid
+    password: !secret fallback_ap_password
+
+captive_portal:
+
+uart:
+  id: uart_bus
+  tx_pin: GPIO16
+  rx_pin: GPIO17
+  baud_rate: 115200
+  parity: NONE
+  stop_bits: 1
+  # debug:
+  #  direction: BOTH
+  #  dummy_receiver: false
+  #  after:
+  #    delimiter: "\n"
+  #  sequence:
+  #    - lambda: UARTDebug::log_hex(direction, bytes, ':');
+
+#deep_sleep:
+#  wakeup_pin: GPIO15
+#  wakeup_pin_mode: KEEP_AWAKE
+
+ld2410s:
+  uart_id: uart_bus
+
+binary_sensor:
+  - platform: ld2410s
+    has_target:
+      name: Presence
+    has_threshold_update:
+      name: Threshold update running
+
+sensor:
+  - platform: ld2410s
+    target_distance:
+      name : Target Distance
+    threshold_update: 
+      name: Threshold update progress
+
+number:
+  - platform: ld2410s
+    max_distance:
+      name: Max detect distance
+    min_distance:
+      name: Min detect distance
+    no_delay:
+      name: No detect report delay
+    status_reporting_frequency:
+      name: Status reporting frequency
+    distance_reporting_frequency:
+      name: Distance reporting frequency
+
+button:
+#  - platform: template
+#    name: Enter sleep mode
+#    entity_category: CONFIG
+#    on_press:
+#      - deep_sleep.enter: {}
+  - platform: ld2410s
+    enable_config:
+      name: Enable config mode
+    disable_config:
+      name: Disable config mode
+    apply_config:
+      name: Apply config changes
+    auto_threshold:
+      name: Start auto threshold update
+
+select:
+  - platform: ld2410s
+    response_speed:
+      name: Response speed
+
+text_sensor:
+  - platform: ld2410s
+    fw_version:
+      name: Firmware version
\ No newline at end of file
diff --git a/ESPHome/temp.yaml b/ESPHome/temp.yaml
new file mode 100644
index 0000000..addc13b
--- /dev/null
+++ b/ESPHome/temp.yaml
@@ -0,0 +1,44 @@
+esphome:
+  name: livingroom_temp
+  platform: ESP8266
+  board: d1_mini
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: G/bagvG+KxSnRalMoU3JHVbHyQboABEPoCGu4Wd48so=
+
+ota:
+  - platform: esphome
+    password: !secret ota_password # "esp_admin"
+
+mqtt:
+  broker: !secret mqtt_broker_ip
+  username: !secret mqtt_username
+  password: !secret mqtt_password
+  # post values to the DIYLess thermostat topic 
+  # topic_prefix: diyless_thermostat/cmnd/things/thermostat/properties/temperature
+
+one_wire:
+  - platform: gpio
+    pin: D4
+
+sensor:
+  - platform: dallas_temp
+    update_interval: 30s
+    name: "temperatuur"
+    id: wemos_temp_woonkamer
+    address: "0xae3c2df649900c28"
+    on_value:
+      then:
+        - mqtt.publish:
+            topic: diyless_thermostat/cmnd/things/thermostat/properties/temperature
+            payload: !lambda |-
+              return to_string(id(wemos_temp_woonkamer).state);