external_components:
  # LD2410s mmwave sensor
  - source:
      type: git
      url: https://github.com/MrUndead1996/ld2410s-esphome
      ref: main
    components: [ ld2410s ]

esphome:
  name: ld2410s-esp32
  friendly_name: ld2410s-esp32

esp32:
  board: esp32-s2-saola-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: !secret api_encryption_key

ota:
  - platform: esphome
    password: !secret ota_password

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: !secret fallback_ap_ssid
    password: !secret fallback_ap_password

captive_portal:

uart:
  id: uart_bus
  tx_pin: GPIO16
  rx_pin: GPIO17
  baud_rate: 115200
  parity: NONE
  stop_bits: 1
  # debug:
  #  direction: BOTH
  #  dummy_receiver: false
  #  after:
  #    delimiter: "\n"
  #  sequence:
  #    - lambda: UARTDebug::log_hex(direction, bytes, ':');

#deep_sleep:
#  wakeup_pin: GPIO15
#  wakeup_pin_mode: KEEP_AWAKE

ld2410s:
  uart_id: uart_bus

binary_sensor:
  - platform: ld2410s
    has_target:
      name: Presence
    has_threshold_update:
      name: Threshold update running

sensor:
  - platform: ld2410s
    target_distance:
      name : Target Distance
    threshold_update: 
      name: Threshold update progress

number:
  - platform: ld2410s
    max_distance:
      name: Max detect distance
    min_distance:
      name: Min detect distance
    no_delay:
      name: No detect report delay
    status_reporting_frequency:
      name: Status reporting frequency
    distance_reporting_frequency:
      name: Distance reporting frequency

button:
#  - platform: template
#    name: Enter sleep mode
#    entity_category: CONFIG
#    on_press:
#      - deep_sleep.enter: {}
  - platform: ld2410s
    enable_config:
      name: Enable config mode
    disable_config:
      name: Disable config mode
    apply_config:
      name: Apply config changes
    auto_threshold:
      name: Start auto threshold update

select:
  - platform: ld2410s
    response_speed:
      name: Response speed

text_sensor:
  - platform: ld2410s
    fw_version:
      name: Firmware version